Products For:

• Extending life spans of municipal lagoons and ponds
• Solidification of storm water ponds and lagoon sediment
• Storm water pond and lagoon maintenance
• Polymers for stabilization, solidification and recovery in existing tailings

****NEW SAP SUPPLY**** Super absorbent polymer product ideal for large-scale waste water projects, hydro-excavation spoils and slurry, heavy industry demolition with wastewater issues, oil and gas drill cuttings or any other application where large quantities of wastewater needs to be absorbed, solidified or stabilized quickly. This SAP is ideal where chloride content is less than 8000 ppm and is not compatible with heavy oils. This SAP is considered as non-medical grade directly from the manufacturer which allows for a substantial reduction in price and comes in 1 ton super sacks. Follow the link below for an example of an actual cost comparison for using SAP’s vs a competing solidification product, the savings could be substantial when using SAP’s.

EIS_SAP_Solidification_CostComparison_CalculatorX

Super Absorbent Polymers

Conventional methods for treating liquid waste are poor. They add amendments like sawdust to meet solids criteria for transportation to landfill – expanding volume by up to 300%. Clients maintain greater control of waste materials by processing liquids on site and transporting only solids off site with reduced environmental risk.

Engineered reagents, combined with high shear mixing technology typically only requires a dose of 0.5 – 1.5%. Our leading-edge liquid waste treatment processes address the needs of a broad range of industrial markets, including Horizontal Directional Drilling, Oil and Gas Drilling, Hydro-Excavation, Environmental and Municipal Waste Management Processes.

Clients normally realize a 30-60% cost savings and reduced risk and project time by reducing the number of trucks and distance to final disposal to complete their projects. The greenhouse gas emission reductions from a 2/3 reduction in vacuum truck requirements is compelling and consistent with generator corporate social responsibility objectives.

Drilling Fluids Solidification Reagent -Description

 This is a powdered reagent used for the solidification and stabilization of drilling fluids and other liquid waste streams. It is a non-hazardous, non-toxic, chemically inert reagent specifically designed to solidify liquid wastes to meet the Paint Filter Test (PFT) and the Toxicity Characteristic Leaching Procedure (TCLP) for Heavy Metals. Typical dosage will be 0.75 -2% wt/wt.

Benefits

Immediately converts liquids to a solid (<30 min)

Utilization with mixing units can achieve throughputs of up to 1000 gal/minute or more

Creates a dry, stackable solid for easy handling

Can reduce weight and volume of waste material

Helps waste pass Toxicity Characteristic Leaching Procedure (EPA Method 1311).

Helps waste pass paint filter criteria

Minimal humidity effects

Key components are FDA approved

Landfill friendly and does not biodegrade

Semi Solids and Sludge Solidification Reagent – Description

This reagent consists of a proprietary blend, incorporating both absorbent and adsorbent materials, resulting in low addition requirements to meet solids disposal criteria.  It is non-hazardous, non-toxic, chemically inert, non-dusty and absorbs very quickly.  It is ideal for solidifying semi-solids and sludges to pass the Paint Filter Test (PFT). Typical dosages for it is 0.25 -1% wt/wt.

Benefits

• Immediately converts drill fluids to a solid (<10 min)
• Utilization with the SSM units can achieve throughputs of up to 30m3/hour
• Metered into waste streams through the SSM for optimal cost management
• Creates a dry, stackable solid for easy handling
• Can reduce weight and volume of waste material
• Helps waste pass paint filter criteria
• Key components are FDA approved
• Approved for use in clean fill applications in all/many jurisdictions
• Landfill friendly and does not biodegrade
• Suitable for manually mixing in small or large batches

Oil Based and Inert Cuttings Solidification Reagent – Description

This reagent has been engineered to effectively solidify oil based and invert cuttings. It is non-hazardous, non-toxic, chemically inert, and consists of naturally occurring minerals. The typical dosage is 2 -3% wt/wt, and it has proven to be a superior product to traditional bulking agents such as sawdust or fly ash.

Benefits

Immediately converts oil based drill cuttings to a solid (<5min)

Works effectively with bulk mixing applications

Designed to have high oil absorption capacity

Solidifies at significantly lower dosages than traditional bulking agents

Creates a stackable solid for easy handling

Helps waste pass paint filter criteria

Minimal humidity effects

Landfill friendly

Horizontal Directional Drilling & Tunneling

This reagents reduce transportation and handling costs and reduce the environmental impact of disposal. Drill fluids or ‘mud’ are liquid wastes and regulated by many jurisdictions, these are treated with an average reagent dose of under 1.5% (by weight) eliminating the need for further liquid waste treatment. Whether collected from a cleanout pit or a centrifuge, our reagents can help you to reduce the cost of transportation and disposal while improving safety and compliance.

Oil & Gas Drilling

In the energy sector, industrial processes produce liquid byproducts that require safe disposal. This technology is contained in one mobile unit operated by a trained technician. They arrive at a site and pump the liquid waste through a patented mixing unit combining it with an environmentally safe reagent. Mud from horizontal wells can be water or oil based, we can help with both and out methods are an ideal solution if you have 1,000 gallons or 100,000,000.

Environmental

For environmental remediation projects, this proprietary formula is environmentally friendly adding no contaminants or impurities which would diminish the solidified waste’s status for beneficial reuse options. If you’re a transfer station bulking liquid wastes, our system will help you to ship less waste for final disposal and reduce your carbon footprint.

Hydro Excavation

Hydro excavation uses water to break up soil, which virtually eliminates any risk of underground utility damage however, with a resulting soil slurry. Transport, testing and disposal of this liquid waste is very costly, dump sites for hydro excavation mud are scarce and costly; onsite solidification will help you to ease the pain of mud disposal. This solidification reagent quickly and easily accelerates the solidification process eliminating the need for costly vacuum truck transportation and liquid waste treatment.

Benefits

No need for expensive vacuum trucks.

Fewer vendors to manage.

MOECC and AER approved.

Increased landfill lifecycles.

Improved compliance with regulations.

The waste going to landfill is significantly reduced.

Reduce greenhouse gas emissions by 66%.

Environmentally friendly.

Best of all, this process costs less.